Bonnie: “Rule the kitchen with this new Ninja Master Prep,” boasts the makers of this new kitchen appliance.
They claim that this under-$50 Ninja could dice more evenly than my expensive food processor and chop ice better than blenders.
“Skeptical,” is an understatement.
So, when asked, I agreed to test this as a possible FeaturedBite on Bite of the Best.
The Ninja came with a “Master Pod” containing the motor, which fits atop the two containers to power the machine. One use is on the “Mini Master Prep” a 2-cup quasi-food processor for chopping; the other is on the “Master Prep Pitcher,” a 48-ounce blender for making frozen drinks and smoothies.
The removable blades (notice the plural!) sit inside the containers, each of which has a pour spout and comes with a blue (my favorite color) storage lid.
But, does the Ninja work?
I first tested it on an onion. I followed the instructions’ suggestion to pulse the motor until the onion was the consistency I wanted. When done, I removed the top expecting to see different size pieces. Wrong. I found no chunks, just evenly chopped onion pieces. Same results with a ripe tomato.
Next test was the blender. The Ninja folks boast that this “blasts ice into…fluffy snow to make restaurant-style drinks in just seconds.” It does just that. Think frozen margaritas or daiquiris, yogurt smoothies or any slushie drinks.
Before making drinks, I suggest making ice cubes from whatever liquid ingredients you’re planning to use so you don’t dilute your drinks.
They suggest you serve, seal and store in the same container. That’s where I no longer follow their suggestions. I prefer to serve in nonplastic containers.
I like this product so much that one of my talent agency clients is now representing the Ninja.
Bryan: Ok, so I’m not going to lie. I definitely felt a little twinge of “infomercial” when first seeing my Ninja Master Prep. I mean, it slices, it dices… Don’t look at it the wrong way or it’ll kick your a$$! I heard the voice of kitchen gadget guru, Ron Popeil echoing in my head: “It’ll solve all your kitchen needs,” he whispered. “But I’ve heard that all before,” I answered.
Could it be true this time?
I have to say that part of my review of this product is unfortunately going to involve bashing another, similar product. While I don’t like pointing fingers, I had been promised this same litany of abilities from another company once, though my immersion blender/chopper from the Bistro collection truly failed to deliver on any of its boasts. My milkshake maker was a bust and impossibly hard to use, while the mini food processor accessory couldn’t even make its way through an already pre-chopped onion. I was promised everything and I got nothing. It was simply useless. (Sorry Wolfgang, you still make great pizza. We’re cool, I promise!)
When the Ninja arrived, I readied myself for disappointment again, but this time found none. The Ninja not only delivered on its promises, it exceeded every one of my expectations! This is two kitchen devices in one, and each of them actually works! Taking into account all the additional accessories, the Ninja is phenomenally useful.
The Ninja is quite a powerful and unique blender and food processor. I realized why this kitchen gadget got its name as soon as I started using it. While most other blenders and choppers have a single, bottom-dwelling blade, the Ninja has dual blades. This unique, if not revolutionary, adaptation allows the gadget to transform ice cubes into perfect, creamy frozen drinks in just seconds. Many blenders will leave chunks or transform cubed ice into a watery mess. There is something special though about the dual blades, creating the perfect consistency for shakes, smoothies and frozen cocktails.
The mini food processor is equally as powerful (both blades use the same interchangeable, top-driven motor). The chopper perfectly produces diced or minced vegetables; onions, potatoes, carrots, celery, and the like all passed with flying colors! The Ninja is also perfect for any of your salsa or dips. The pulse control makes it easy to avoid turning your entire creation into mush.
The “Master Pod” easily switches from the Mini Prep to the Prep Pitcher. I was worried, as I’ve sometimes seen TV personalities make this type of switch with ease, only to be confounded by my own, at-home try. I like things that are idiot-proof and the Ninja passed its tests with flying colors. The pod only fits on in one way, and the blades can only connect in one way. Utility is further compounded, as the set includes two storage lids, allowing your Ninja creations to last in the fridge without the need of an additional storage container.
The blender pitcher is generously sized, ideally designed for parties with a large 48-oz pitcher. It’s perfect for making several drinks at a time, and features an easy flip pour spout and no-slip bottom. The Ninja pieces are also dishwasher and microwave safe. It’s not going to make your dinner for you, but the Ninja will certainly multitask at your behest.
Eric: To explain this in modern written language, OMG this product is not a WTF. The Ninja, or as I like to refer to it, “the little infomercial product that could,” is an appliance designed for the modern kitchen as well as for the fast-paced lifestyle many of us live. Similar to its infomercial nemesis, “The Bullet,” the Ninja is designed for two specific reasons – crafting great ice-based drinks and prepping the otherwise tedious mise en place.
Darryl Nickles~
Go to my post SMIDGE #692 for the 4 websites of drinks.(This site has a fit everytime I post a URL.)
They sound awesome! Rikke might let us know which ones she likes best!??
smidge i have a fushion blender by Oster (even has a control to chop foods–check into it–bought in Bed bath Beyond- for like $80 and used their $20% off coupon on single item-somehow i didn’t get a cap in my box and they sent me a brand new one–told me to destroy the base and keep the extra glass jar…now that’s great customer service …thanks for those 4 drink websites–
Thanks Robert,
I went to their website and I see what it looks like.Its advertised for $79.
I imagine it does a lot better than the OSTER I have.But mine has a box full of attachments for grating,shredding,meat grinding…and more.
However,
I don’t see how yours could compare with this little NINJA Master Pro?
The blades are supposed to be one of its secrets. I can do a whole lot more processing of different kinds of foods than the typical blades like the Oster has. If you have a Master Pro (??) you know what I mean. And this still applies to the new 1100 I see advertised (I don’t have it~ yet)
I’m astounded at the attachments for bread dough!
I think the attraction is for a compact machine that is easy to use and store. No matter your needs, it doesn’t overwhelm or intimidate anyone.
Your welcome for the drink urls…there are more. Just Google ’em! lol
getitright..
Here’s an update on the sweeteners…
Bought some stevia from CO-OP and it tastes OK…supposed to cook well…still playing with it….but glad you suggested it!
Thanks
I just got a ninja for Christmas this year after wanting one and taking about wanting one for a year and 1/2. Everyone knew that I got just what I wanted because I began to cry when I realized what I got.
I am so glad I got the ninja and I have never had another product that did what it was supposed to do. Now my parents are saving up to get one for themselves!!!
My boss had to get 9 stitches on his pinky from the Ninja. All he did was take it out of the box upon delivery! Talk about pictures. Yes he should have been more careful but it was not packaged in a safe way
Funny, I once cut a deep slash on my pinky all the way to the bone (you could see it)
I had to hold it tight all the way to ER and then wait a couple hours….
They said I didn’t need stitches cause it had begun to stick OK in that time…butterfly patch and I was outa there?
(There was so much blood my Husband thought we all had been slashed by an intruder before he found the note saying where we were.)
Got my Ninja for Christmas, and have never had an appliance that I loved more. Well worth every nickel and then some!!!
This product should be taken off the shelves. My friend was clearing something off the blade and it turned on and sliced her fingers open- 28 stitches later. She almost lost her index finger (18 stitches) and cut the main vein. 11 stitches in the other fingers. Doesn’t it have a safety mechinismn so it doesn’t start unless it is screwed into the cup or container?
To all the readers of this blog. The posting by Dawn I am sure is by a competing company as you all know that there is no way that anyone can have their fingers anywhere near the blades when the machine is running. The lid has to be on the container and then the motor set on top of the lid to even start the blades to turn. Shame on you DAWN. As for the other person who cut their finger taking it out of the package, we all have to be a little responsible for what happens to us. When we see any kind of a blade we should know to take care and not put the blade near any part of our body. It is much simpler to blame someone else for us not taking care ourselves. PMC
When I opened my Ninja the blades jumped right out of the box
and sliced my brother to ribbons.
It’s okay. He was kind of a pain in the butt anyway.
I thought the Ninja was a great product when I got it for Christmans…it is VERY Dangerous!!! My son was using it last week and it flew apart and the blades came out and sliced his fingers. His middle finger was sliced all the way to bone, cut tendons and the nerves. The 1st knuckle on his index finger looked like hamburger meat and it sliced open his thumb! IT SHOULD NOT OPERATE IF THE LID IS NOT SECURE BUT IT DOES!!!!!!!!
He had to have surgery to repair the tendons and nerves in his middle finger, and the specialist wasn’t able to do much to his index finger but take more of the meat off and stitch it up. He has to go through 6 weeks of physical therapy now in order for him to be able to use his middle finger!
Camille, if you have read all the blogs about the Ninja & use it properly, you’ll be okay. Hope you son’s hand gets okay but you had better keep sharp knives away from him also. Ninja accidents are user errors.
SO TRUE! NO ONE should run an appliance like that, not even a regular blender or processor with out making sure the top is on and with the Ninja, you are holding the cover shut because of the pod. The blender has a cover, too! I notice that most people with regular blenders hold the cover on with one hand and push the buttons with the other. I always have, too. You know the vision of the blender throwing everything all over the ceiling?
One thing you did not tell us was the age of your son.
Some how just from reading your report, he sounds young enough that I’d caution him around any kitchen appliance whether sharp or could cause a serious burn! Sadly, some adults need to watch it, too, and don’t handle things with the knowledge that they ARE dangerous and don’t take precautions.
I do not represent another company. My friend has two hospital bills to prove her injuries along with several more to come by a plastic surgeon etc. She will be contacting the Ninja company as soon as she is able.
Boy, this accident is sure leaving me puzzled. This Dawn says she does not represent another company but her friend has hospital bills to prove injuries right after another post about injuries to a son. Just how in the world can someone get cut with the blades with the safety cover on? My motor pod will not work unless the cover is on completely and the blades positioned just right. If the cover comes off the motor would no longer be connected to the blades so how is it still cutting?
I bought a 13 piece set of Saber knives from Germany for Christmas and I keep cutting myself because I just am not used to knives that are so sharp. That is not the company’s fault but mine. Even so this is not like the Ninja since they have built in protection when the unit is engaged.
That is like saying the Bullet cut someone up while using it, in my opinion.
Hey, this sounds like the 1984 movie “Gremlins”…
Remember the scene where the mom turns the blender on ?
Good job!!…I would have to have someone force my hand into a blender that is still plugged to the outlet! And they would have to drug me first!(what’s with these people?)
http://thetorchonline.com/2009/10/11/gremlins-in-the-blender/
Our friend admits she should never hold an appliance with blades while it is plugged in, but she never thought it would actually turn on since the cover was not on it was not locked into position. There were several people in the kitchen when the accident happened. They almost amputated her index finger. It severed the main blood vein. They are not sure if she will ever be able to use the finger again, time will tell. She was ambulanced from one hospital to another 3 hours away because they could not handle the type of injury she had at the smaller hospital. Believe me, this is not a horror movie and is not funny. I am posting this so other people will not get injured like this.
NEVER NEVER to 100th power…buy any product that turns itself on without the cover intact or all pieces intact–this ninja is made in China, correct…there that speaks for itself–shortcuts esp with safety…I own products such as a food processor and mine won’t turn on unless the cover is set and the bowl and blade set too…sorry to hear what happened to that woman…no ninja for me…
(hello! people???)
I’m sorry to hear something like this happened to ANYONE!
But really, ???
I have the original blue Ninja. It has a safety interlock built into the power pod so that it must be properly seated into the lid for interlock to allow the motor to be engaged. There’s no way to engage the motor otherwise. Also, since the blades are seated well inside the base container, they cannot cut one’s fingers unless the fingers are placed inside the base. These recent posts of injury are suspect to say the least….that or puposely harming oneself for sake of litigation.
Like Charlie, I own the original blue ninja and also the newer black one with more power. There is NOT any way for someone to put their hand in any of the containers I own and chop up their fingers, unless one was to cut the fingers off in the first place. Just because it is made in China does not mean it is crap either.
I looked at the Ninja Kitchen system and it looked like it had to have the lid on to work also but I am not sure.
With my Vita Mix Blender I could chop up my hands if I was stupid enough to reach down in there with the motor running. I may be getting old (69 yo Friday) but I am not that senile yet!
Those that actually own a Ninja Pro know that even if its motor did come on by just plugging it in, that would make no difference because it will not chop until placed on the safety lid. And how could that even be possible since one must push down on the pod to turn the motor on?
This really reads to me like someone who has too much time on their hands and not enough brains to make up another phony email story.
If this was the blender and it would work without the lid in place, I apologize but the unit this reviews…. I just do not believe any story on that. I don’t have the ninja professional blender that sells for 99.99 on their web site so maybe…..that one?
Robert, you first came on here saying your NINJA broke the first time you used it on lettuce, I believe?
Then you say you don’t have one? You own a product like a processor?
SOOooo)
Having fun my man?
We love our NINJA MASTER PRO’s an
you’re not going to change anyone’s mind by making childish comments.
Dawn must be lost and on the wrong website!
I don’t believe it for a minute!
I’ve had the blue Ninja for some time and just recently bought the black one from Costco for $29.
Those telling stories of nasty injuries from somehow touching the blades while running the Ninja are clearly lying. It’s just not possible for the units to operate in that way unless the multiple safety features were disabled for some crazy reason. Even then it would be VERY hard to do.
I use my Ninja every day and have never come within a country mile of cutting myself with it. It’s at least as safe as any other well made food processor or blender. Infomercial not withstanding, it’s very well designed and built.
I don’t know what moves people to post such terrible lies, but it’s a despicable thing to do.
Most forums have stricter rules about how to be able to post to a site.
The sick-os can and do play on this one from time to time.
Love my Ninja. I am currently out of town and i need the salsa recipe that comes in the Ninja booklet. Can anyone help me?
I bought a Ninja Master Prep right after Christmas. I was wondering if the cutting blades are permanently sharp, or will they eventually need resharpening? If so, when?
Fresh Tomato Salsa
4 Roma Tomatoes, quartered
1/4 small white onion
1 Serano Chilies, split and deseeded
1 Tbsp Whole Cilantro leaves
1/2 sp. sugar
1/2 tsp slat
juice from 1/4 lime
pinch of oregano
pinch of cumin
Add all ingredients into the 40 oz. pitcher. Use short pulses, about 3 times until desired consistency is reached
This product is dangerous. There is no interlock to prevent it from turning on when the motor is not attached to the blender. My wife just cut 4 of her 5 fingers on her right hand and spend 12 hours in the emergency room. You definately do not want kids around this device. Very dangerouc. They need to take it off the market until they can make it safer (it should not turn on unles it is fully assembled). I recommend not buying this product and if yuo already have one, stop using it. If you dont beleive me, I can send you pictures of my wifes fingers…
I have trouble turning things on without the thing plugged in and these people have it turning on without the motor attached??
uhuh
This board has obviously been invaded by troll(s). Ignore them and they will go away.
I can’t figger out how people can cut fingers off, you have to be smarter then the machine, and READ ALL of the instructions be fore using any appliance.
Kitchen appliances are dangerous, not just to fingers. I hear a story of one guy cutting off his head with one of those Bullet things.
Gotta tell you guys how i did it and got lucky ,,first i bought the Ninja,,opened the box took the Ninja out ,,READ THE DIRECTIONS ,then set off on my adventure ,,,peeled the onions quartered them to fit in the machine ,made sure to keep away from the blades after all i know enough to know they are sharp if they are going to chop my onions thats what i bought the Ninja for , i secured the top and then placed the power head on THEN GUESS WHAT I DID LAST I PLUGGED THE MACHINE INTO THE WALL SOCKET ,,pulsed 1 2 3 times and fell in love with my Ninja, lost no fingers because pure common sense tells me it cant hurt me if its not plugged in and im not likely to play palsy with the blades ,,,,,,,,,, this Ninja board is better reading than a book, great recipe sharing ,Some great reviews and then a few clowns who think its funny to hijack the board , ,,,,,
To Charlie and others, I am not a troll invading this thread. My wife really did cut 4 of her fingers. And to the others saying that common sense would have prevented her fingers from being cut…well, if it was unplugged then the accident would not have happened. That is true. But, the machine should not even turn on unless it is fully assembled whether you have common sense or not. She wrongly assumed the machine would not turn on if it was not assembled, like other blenders we have used. All I am doing is warning people that this is not the safest blender out there. It probably cuts really well and works great on anything you want to cut. I don’t know and will never know how good it works on food since we stopped using it. Also, I have emailed the company and they have responded askimg me to call the directly, which I will next week. Don’t take my advice if you don’t want to. I am just telling our story of this product.
I purchased a Ninja 1100 but did not get a recipe book. I am trying to get ideas for non alcoholic frozen drinks, fruit, coffee, etc. Do you have a book available or a site I can find? Please help.
Thanks,
Debbie
Try the vita Mix site for recipes for beverages
http://www.vitamix.com/foodservice/recipes/beverage.asp
http://www.vitamix.com/household/Health/green_smoothie.asp
John, I guess we just don’t understand how any one can cut their fingers with the machine running. It would be easier to believe if you said that she cut them washing the blades. There is just no way to cut fingers when the machine is put together. Not like normal blenders where any fool can stick their hand in it while it is running. I never unplug my machine. It does does not work without it is set on in the proper fashion and there is nothing on the motor pod that is going to cut anyone so no need to unplug it in my opinion.
Getitright, she was using it wrong. She had the blade in the motor with the motor out. She thought the blade would lock into the motor unit. Obviously, she was mistaken. She also assumed that motor would not turn on if it was not attached. She was also wrong. She also had it plugged in which was not smart. I realize her mistakes. But even so, the motor should not turn on (and no blender should turn on) unless the unit is fully assembled. So, if she was using it correctly, the accident would not have happened but there should be an interlock or something to prevent this from happening. I can just see a kid trying to make salsa or something with it and not know how it goes together and do the same thing. Anyway, I dont mean to take up thie forum talking about this issue. I just wanted to get the message out about what happened so consumers could make a decision on buying a safer blender. thanks for listening.
Also, the poster DAWN is talking about my wife. So, it is not a bunch of people making up this story. I didnt realize she was even posting to this site when I posted mine. We are talking about the same person.
Smidge, I have been using the recipes that I got with the blender. I definately have the master prep, came with a smaller bowl and blades and the jug blender. I live in South africa so we have different marketing to you, but definately from a company that does many infomercials.
One of the reasons why I love the Ninja so much is BECAUSE of it’s safety features. It is written all over the box “Danger, blades are VERY sharp” Yes sure I have cut my finger and so has my cleaning lady but we both agreed that we were the ones that handled the bladed incorrectly. She had them in the basin in soapy water andf forgot they were there and put her hands in the water and got cut. I picked the blades up incorrectly and gave myself a small knick. But I cannot imagine how the blades can turn withouth the safety lid. The actual blender part is a completely seperate appliance and I have tried to see if it would switch on without being connected to the blades and safety cover and it does not work.
Just the other day (on my birthday) I was slicing melon in a rush, pushing the knife towards myself. No 1 mistake. I cut my finger so badly, there was blood everywhere. I didn’t have stitches but the wound is so bad now I wonder if I should have had stitches.
Moral of the story, I am not sueing the knife company!! it was my own stupidity!
The stories of injuries are really getting out of hand. I clean my Ninja right after use (very careful cleaning the blades) and put the blades back in the container where I keep them. I don’t see how the blades would stay in the pod. Then, it wouldn’t be an easy task to push down on the pod to make the blades spin. If everyone would just read & be careful. I hope sharp objects are kept away from these people.
John, you say the ‘machine should not even turn on unless it is fully assembled’. Well neither one of my two different model Ninjas will turn on UNLESS THEY ARE FULLY ASSEMBLED. There are multiple specific features build into the Ninjas to keep them from turning on unless fully assembled.
Which leads me to believe that you have never used or perhaps even seen a Ninja. Or you would know this.
To be clear, the Ninja motor WILL NOT turn on unless the container lid is firmly seated atop the container. The Ninja motor WILL NOT turn on unless the motor is ALSO firmly seated atop the container lid. WILL NOT TURN ON!
Don’t know what you’re up to John, but it’s not appreciated. Please just go away.
(I have no stake in or connection with the company that makes Ninjas. I simply like to make lots of smoothies, and the Ninja is a great tool for that.)
Richard
I forgot to mention. I leave my Ninja motor plugged in all the time. It’s more convenient that way. And completely safe.
Richard
ALL USERS READ ~
John,
There is a pulse switch on my Oster blender…and if I set the blades (without the container)on top of the unit and hit the pulse switch…the blades go flying…actually flew off of the unit onto the counter!
If I had been playing with the blades to clean…I would have cut my fingers off!
NOW~
If you poke the blade assembly into the hole in the middle of the pod that contains the motor AND THE OFF-ON mechanism, you will have the same thing happen!
There would be no purpose to a “lock” of any kind because you would be ASSEMBLING the unit in a completely foreign manner! THIS UNIT WAS NOT DESIGNED TO BE ASSEMBLED THAT WAY!
All appliances have a set of instructions. The instructions for assembly on the Master Pro is pretty simple. ~You set the blades inside the container away from anything except what you intend to chop! Those blades are never set inside the motor’s hole until the last step of the assembly proceedure when the blades have been covered and set by the lid!
You see~ there is a safety measure…your wife skipped it!
Anyone who has not read a set of instructions for the assembly of an electrical appliance is BEGGING FOR DISASTER.
I am so very sorry but, as horrible as I’m sure your experience is…it was completely preventable!
If you had read the directions for assembly AND not plugged the appliance in until you had it completely assembled this would not have happened.
ALSO–
THERE IS NOW REASON TO BELIEVE THIS WOULD HAPPEN TO A PERSON WHO IS FOLLOWING DIRECTIONS.
THEREFORE, ANYONE WHO WOULD CONSIDER PURCHASING THE NINJA MASTER PRO COULD BE ASSURED OF ITS SAFETY.
MY NINJA MASTER PRO IS AS SAFE AS POSSIBLE FOR AN ELECTRICAL APPLIANCE OF THIS NATURE TO BE!
I NEED TO CORRECT MY STATEMENT ABOVE….
“THERE IS “NO” REASON TO BELIEVE THIS WOULD HAPPEN TO A PERSON WHO IS FOLLOWING DIRECTIONS.”
I BELIEVE THIS APPLIANCE TO BE SAFE!
I have an oster infusion blender of my own purchased recently at BBB and not any NINJA product which they sell there too and after each use before cleaning it each time, i make sure before i touch mine, it’s off and the plug is not connected too…i took extra notice of mine too this day since it’s digital…the only way i can cut myself is being ignorant and blind…another thing any recipe not offered here can be easily googled or read every post here some people wree kind enough to supply websites of them…
BTW–jack lalanne died this day…i bet his juicer will bottom out eventually in price or the name may change–opps his wife probably owns his name now…strike that
I have a hard time lining up the top (which plugs in) to the cover of the jar. On a few occasions, I had to completely empty the jar in order to turn the blade just enough to get the top to fit properly. I have been frustrated on a number of occasions because of this.
Today, for the second time, when pouring the contents into a glass, the cover came off and the entire shake spilled all over the counter, the floor and the dog’s head.
If I was able to try this blender out before making the purchase, I would have saved myself $60.00 and lots of aggrevation.
I just wrote a review of the Master Prep and the Ninja Professional Blender – you can read about it here:
http://pandazen.com/2011/01/31/ninja-product-review/
I really like the master prep better than the blender, even though the blender is rated at higher watts.